Samsung HCN5529W Owner's Instructions Manual page 14

Your NEw TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continu-
ously, such as a VCR or a DVD player.
Because there are two sets of input.jacks, you can connect two different A!V components
(i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting eqllipment, see pages 1? - 25.
@0 O0 @ 0
14
0
@
0
0
0
0
ANTENNA terminals O
Two independentcables or antennas can be
connected to these terminals. Use ANT-A and
ANT-B terminals to receive a signal from
VHF/UHFantennas or your cable system. Use
the ANT-A OUTterminal to send the signal being O
received by the ANT-A terminal out to another
component (such as a Cable Set Top Box). The
PIP channel can be received only when a signal
source is connected to ANT-A. O
DIGITAL INPUT (Digital
Visual Interface)jack
Receives the digital signals from a Set-top Box.
COAXIAL OUTPUT
Connectto the a Digital A udiocomponent.
OPTICAL OUTPUT
Connectto the a Digital A udiocomponent.
SERVICE PORT
Forserviceonly.
AUDIO-VIDEO MONITOR
OUTPUT jacks
Connecttothe audio/video inputjacks of a
recordingVCR.
@
O
VIDEO INPUTjacks
Connect to the video output jacks of VCRs, DVD
players and similar devices (Two sets are avail-
able: Video1 and Video2).
AUDIO INPUT jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
DVI AUDIO INPUTjacks
Receives the digital audio signals from a set top
box.
S-VIDEO INPUT jack
Connect t o an S-VHS VCRor DVD player.
COMPONENT 1, 2 (480i,
480p, 720p, 1080i)
AUDIO/VIDEO INPUTjacks
Connect a sourcethatoutputs480i/480p/720p/
1080i Y , P sandPR signals,suchasa DVDor DTV
Set-Top Box.