Samsung HL-S5687W Owner's Instructions Manual page 32

Operation
Press the _1 or • button to select the Antenna connection,
then press the ENTER button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Air+Cable : "Air" and "Cable" antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto program.
By default, the cable TV system is set to "STD'.
If you want to select another type of cable system, press the
_1 or • button to select "STD', "HRC" or "IRC'.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
Press the ENTER to start the auto program.
The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
Select "Return" by pressing the • or • button, then press
the ENTER button to return to the previous menu.
Press the EXIT button to exit.
• The TV must be connected to an antenna/cable in order
to receive digital TV signals. Even if a particular channel
is deleted from the memory, you can always tune to that
channel directly by using the number buttons on the
remote control.
• When connecting Digital Cable to a Set-Top Box,
Channel Memorization is done on the STB.
To view the STB on your TV, select the Input jack the
STB is connected to with the SOURCE button on the
remote control. (see page 45)
NOTE
• All available DTV and analog channels are automatically stored in memory.
English- 32