Installing Batteries i n the Remote Control
With normal use, the batteries in the remote control should last about a year. If you notice a performance
degradation
while using the remote, the batteries may need to be replaced. Make sure you replace both
batteries and do not mix old and new batteries in the remote control. If you won't be using the remote
control for a long time, remove the batteries and store them in a coo], dry place.
Lift the cover at the back of the remote control
upward
as shown in the figure.
Install two AAA size batteries. Make sure to
match the "+" and "-" ends of the batteries
with the diagram inside the compartment.
J
S_ _ _
Close the cover as shown in the figure.
NOTE
_' Do not mix battery lypes, i.e, alkaline and manganese.
English-
14