Samsung SC-DC163 Owner's Instruction Manual page 4

[ ENGLISH ]
Notices and Safety instructions
2t. LIGHTNING:
For added protection of this CAMCORDER during a lightning
storm or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
CAMCORDER due to lightning and power-%e surges.
22. POWER LINES:
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power
circuits where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
23. OVERLOADING:
Do not overloadwall outlets and extension cords as this can
result ina risk of fire or electric shock.
24. OBJECTS AND LIQUIDS:
Never push objects of any kind into this CAMCORDER
through openings as they may touch dangerous voltage
points or short out a part that could result in a fire or electric
shock. Never spill liquids of any kind onto the CAMCORDER.
Should spiltage occur, unplug unit and have it checked by a
technician before use.
25. SERVICING:
Do not attempt to service this CAMCORDER yourself.
Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel
26. DAMAGE REQUIRING SERVICE:
Unplug this CAMCORDER from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
a When the power-supply cord or plug is damaged.
b. If any liquid has been spilled onto, or objects have fallen
into the CAMCORDER.
c. If the CAMCORDER has been exposed to rain or water.
d. If the CAMCORDER does not operate normatly by
following the operating instructions, adjust only those
controls that are covered by the operating instructions.
Improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the CAMCORDER to its
normal operation.
e If the CAMCORDER has been dropped orthe cabinet has
been damaged.
f. When the CAMCORDER exhibits a distinct change in
performance, this indicates a need for service.
27. REPLACEMENT PARTS:
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer and having the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
28. SAFETY CHECK:
Upon completion of any service or repairs to this
CAMCORDER, ask the service technician to perform safety
checks to determine that the CAMCORDER is in safe
operating order.