10EA (M4X L12)
Follow the steps below to connect the TV to the stand. (50 inch model only)
Screws (M4X L12)........... _ _ 1ti_
Topview
Stand......
_'_--_.::;:::i
Front
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
2,
With your TV upright, connect the TV to the Stand.
Fasten two screws (M4 X L12) at position _, and then
fasten three screws (M4 X L12) at position 0.
NOTE
" Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
. Make sure that at least two persons lift and move the PDP TV.
" Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
English
5