I
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER (b button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Press the A or T button, then press the ENTERE_ button.
POWER
Select the desired OSD (On Screen Display) language.
Press the _ or I_ button, then press the ENTERIZ_ button.
•
Select the Home Use mode. Store Demo Mode is for retail
environments.
•
To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV When you
see the volume OSD, press and hold MENU tor 5 sec.
Press the A or _r button, then press the ENTERI_%_button. Select Air, Cable or Auto.
Selecting a cnanne
Setting the Clock
Mode
View the HD
Connection Guide
Enjoy the TV.
Press the A or T button, then press the ENTERE_ button. Select the channel source
_o memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel _ Auto Program (p. 14).
Press the ENTERE*3 J button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
•
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
•
Manual: Allows you to manually set the current date and time (p. 24).
The connection method for the best HD screen quality is displayed.
Press the ENTERI_%_button.
If You Want to Reset This Feature...
(_
MENUiTrl _ Setup --_ Plug & Play _ ENTERI__
English