Samsung UN55C8000 User Manual page 45

Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV,
View TV Changes Anynet+ mode to TV broadcast mode,
Device List Shows the Anynet+ device list,
(devicename) MENU Shows the connected device menus, E.g, If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(devicename) INFO Shows the play menu of the connected device. E.g, If a DVD recorder is connected, the
play menu of the DVD recorder will appear,
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*devicename).
Setting Up Anynet+
(_ MENU ITTI_ Application --_Anynet+ (HDMm-CEC) _ ENTERI_
Ill Setup
Anynet+ (HDMm-CEC) (Off/On): To use the Anynet+ Function, Anynet+ (HDMm-CEC)must be set to On.
When the Anynet+ (HDMm-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
Even if an external device is still recording, it may turn off.
I
1.
2,
Switching between Anynet+ Devices
Anynet+ devices connected to the TV are listed,
If you cannot find a device you want, press the Red button to refresh the list.
Select a device and press the ENTERI_ button. You can switch to the selected device.
The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.
* Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
* If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
English 45