Cormectmg A Vcr - Samsung TXN2036F Owner's Instructions Manual

INSTALLATION
Connect a coaxial cane
between the ANTENNA
OUT terminal on the cable Incoming
box and the B_IN terminal Cable Splitter _ ""_ RF (A/B)
on the A/B switch, Cable Box Switch
Connect another cable
between the other OUT
terminal on the splitter
and the AqN terminal on
the RF(A/B) switch,
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
75Q
Connect the last coaxial qlr
cable between the 0UT ]
terminal on the RF(A/B)
Incoming
switch and the VHF/UHF
Cable Splitter RF (A/B) TV Rear
terminal on the rear of the
Cable Box Switch
TV,
After you've made tills connection, set the A/B switch to the "A" position for nomlal view-
rag. Set the A/B switch to the "B" position to view scrambled channels. (When you set the
A/B switch to "B", you will need to tune your TV to the cable boxes output channel, which is
usually channel 3 or 4.)
Connecting a VCR
These instructions assume that you have already connected vour TV to an antenna or a cable
TV system (according to the instructions on pages 15-17). Sidp step 1 if you have not yet
connected to an antenna or a cable system.
Unplug the cableor
antenn afromthe backof
VCR Rear Panel
Connect the cable or _ "_
antenna to the _ _@ _NTNNA _ VI_)_U_
Incoming OOT
ANTENNA IN termina! On Cablenr 9
[O (_(_ ®
the back of the VCR, Antenna
18