Chapter 4: Special Features; Customizing Your Remote Control; Vcr Or Dvd - Samsung TXN2036F Owner's Instructions Manual

SPECIAL FEATURES
Customizing Your Remote Control
(TXN2734F / TXN2036F / TXN2726)
Your TV comes equipped with a "umversaF' remote control. In addition to
controlling the T'v_the universal remote can also operate a VCR, DVD and a cable box
(even if your VCR, DVD and cable box are made by manufacturers other than San*sung).
Not_':The"t'_-raot_- co*itrolmight not b_"compatibD with all DVD play_.rs, VCRs, alid CabD bo.ws.
Setting Up Your Remote Control to Operate Your VCR or DVD
1
T.r" i _f y our VCR tor D VDt _row_R
2
Pressthe MODE buttonandmakesurethatthe VCR (orDVD)
LEDisilluminated,
-'4 The remote control has four
'modes": 'T_{ "VCR'. "Cable' and
DVD." Press the MODE button to
switch the remote control to the "VCR"
(or DVD) mode.
Onyour Samsung remote control, press the SETbutton.
Enter 3 digits ofthe VCR (or DVD) code listed on the next
page for your brand of VCR (or DVD).
-'q Make sure you enter 3 digits of the
code, even if the first digit is a "0'.
If more than one code listed, try the first
one.
5" , your <or D, D) does,,ot fur,,
on, repeat steps 2, 3, and 4, but try one of
Press the POWER button on the remote control,YourVCR the other codes listed for the brand of
{0rDVD) S houldturn on, !fyou_VCR{orDVD)turnson, your your particular VCR (or DVD).
rem0tecontrol is nowset c0rrectly. If no other codes are listed, try each code,
000 through 088.
6
Once yourremotecontrolis set up,pressthe MODE button
anytime YOU wantto usethe remoteto operateyourVCR (0r
DVD),
"11 \Vhen your remote control is in the
7 7 7
_\ CR" (or D\, D) mode, the "_olume but-
tons still control your TV_ volume.
Wllen your remote is m the TV" mode,
the VCR(or DVD) control buttons (PLAY,
PAUSE, etc.) will still operate your
VCR(or DVD).
4O