Using The V-Chip - Samsung HL-R5687W Instruction Manual

Special Features
Using l heVoChip
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is
defined by the user). The on-screen menu win instruct you to assign a password (you can change
it later, if necessary).
Vo_ €_
MUTE SOURCE
l)
o ? )
___, 8RI8il1
i
Hew
....... ,diill
to (£an£÷ YourPasswor£
Press the MENU button.
Press the A or W button to
select "Setup", then press
the ENTER button.
Press the A or 'Iv button to
select "V-Chip", then press
the ENTER button.
Press the number buttons to
enter your current 4-digit pin
number, then press the
ENTER button.
(The default pin number for
a new TV set is "0000".)
The "V-Chip" menu is
displayed.
Press the A or T button to
select "Change PIN", then
press the ENTER button.
Press the number buttons to
enter your new 4-digit pin
number.
Re-enter your new pin
number to confirm.
Press the EXIT button to exit.
o The PiP doesn't function when the V-Chip is active.
o If you forget the pin number, press the remote control buttons in
the following sequence, which resets the pin to 0-0-0-0:
POWER (Off), MUTE, 8, 2, 4, POWER (On).
o The V-Chip function only works in RF ,AV mode and S-Video
mode.
fsh - 86