Problem Solving - Eureka Heavy Duty 3600 Series Owner's Manual

PROBLEM SOLVING

NOTE: Turn OFF the power switch and unplug the electrical cord before ser vic ing.
PROBLEM PROBLEM PROBLEM
Motor wonʼt start
No suction at end
of hose
Reduced suction
Cleaner shuts off
General questions
CAUSE CAUSE CAUSE
Electric plug
✓ ✓
Power switch not turned "ON"
✓ ✓
Full paper bag
✓ ✓
Hose
✓ ✓
Front cover not latched
✓ ✓
Full paper bag
✓ ✓
Slip ring open
✓ ✓
Hose
✓ ✓
Internal safety thermostat trips
✓ ✓
✓ ✓
Cord connection at hose
✓ ✓
Assembly or related
attachments
SOLUTION SOLUTION SOLUTION
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is "ON."
Replace paper bag.
Remove any clogs from hose that
restrict airfl ow, then try again.
Push front cover until it latches fi rmly.
Replace paper bag.
Rotate slip ring on wand until hole is
covered.
Remove any clogs from hose that
restrict airfl ow, then try again.
Unplug cleaner and check for obstruc-
tions in hose, wands and at tach ments.
Check for full paper bag.
Clean/replace motor fi lter.
Check powerhead and hose plugs for
proper connection. proper connection.
Call 1-800-282-2886 between 7:00
AM–8:00 PM central standard time,
Monday through Saturday.
Know the model number and serial
number when you call.
7