Table of Contents
Advertisement
Euphonix CO-600 Change-Over System For New Core DF66 Redundancy
Important Note!
Due to the "Hot Swap" capabilities of all card components in the COS chassis, power can be
applied to the unit at any time before after or during card installation. It is recommended,
however, that this feature only be used when necessary.
This is because the hot swap system can not protect from all possible errors made by the
operator during card installation.
Powered on cards are susceptible to damage from accidental shorting due to conductive
jewelry, excessive card deflection, or mis-aligned insertion or cards. To insert or remove
cards while the chassis power is applied, first carefully read instructions in this manual to
prevent damage to equipment.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the CO-600 and is the answer not in the manual?