Avid Technology Artist Color User Manual page 12

Plug one end of the Ethernet crossover cable into the Ethernet jack on the Artist Color back panel.
8
Ethernet cable and back panel jack
Plug the other end of the Ethernet crossover cable into an open Ethernet jack on your computer, router, or Ethernet switch.
9
• Note that connecting directly to the computer may require removing your Internet cable. If you have a computer with two
Ethernet ports, use Ethernet 1, rather than Ethernet 2.
Artist Color connected directly to computer
• An Ethernet router or switch is required to connect additional Artist Series units (such as an Artist Mix), or to connect units
to a local area network.
Artist Color
Multiple Artist Series units connected using a router
Turn on your router (if applicable), then turn on your computer and wait until it finishes starting up.
10
8 Artist Color User Guide
Artist Color