Table of Contents
Advertisement
Media Application Controller Operation Guide
NOTE: For System 5-MC owners, remember the MC mirrors one CM408T module, so
up to four CM408T modules can be used with one MC.
9. When finished adding controllers, click the OK button to close the dialog in Final
Cut Pro. In Soundtrack, click the Close button at the top left to close the Prefer-
ences.
10. Restart the application or computer if initial communication is not achieved.
The MC connects and updates with new track information.
11.7.2 Digital Performer 5
Configuring Digital Performer 5 to operate with the MC using Mackie Control
1. Audio/MIDI setup
•
2. Digital Performer
•
•
•
create up to 4 Mackie Controls and cable to the Euphonix MIDI ports as
defined in EuPrefsPane.
Figure 11-26 Digital Performer Midi Devices
go to: Setup > Control Surfaces
add 1 Mackie Control and select the first Mackie Control from the MIDI
drop down menu
add any additional units as Expander (XT) modules
134
DAW Integration
Advertisement
Table of Contents
