Minimum System Requirements; Installation; Windows Xp - ESI PHONORAMA User Manual

ESI
The rear panel of PHONORAMA contains the following items from left to right:
- headphone; use this output to connect PHONORAMA to a pair of stereo headphones
- power LED; this LED will show the operation status of PHONORAMA
- left (L) and right (R) peak LED to show when the input signal of the phono & line input reaches
0dB input level
- line level output; use this output to connect PHONORAMA to your amplifier or active monitors
a using a 1/4" TRS stereo cable

2.3 Minimum System Requirements

PC
- Intel CPU (P4 or greater) or compatible AMD CPU with SSE instructions
- (min. 1.5 GHz processor recommended)
- Windows 7/Vista/XP (SP3)
- 2 GB RAM for Windows 7 / Vista or 1 GB RAM for Windows XP
- 55 MB available disk space
- hard drive with 8ms (or faster) access time
- 10MB/minute available disk space for recordings
- QuickTime 7 or greater
Mac
- G5 oder Intel Mac (mind. 1 GHz Prozessor empfohlen)
- Mac OS X 10.5 oder neuer
- 25 MB available disk space
- hard drive with 8ms (or faster) access time
- 10MB/minute available disk space for recordings
- QuickTime 7 or greater

3. Installation

Before installing the drivers of PHONORAMA, we recommend to check on the download section
of www.esi-audio.com for updated drivers.

3.1 Windows XP

Disconnect PHONORAMA before you install the driver if it has been connected already. Then
launch setup.exe from the Windows folder of the included Installation CD or from a download of a
recent driver from our website.
You will now see a dialog as shown on the left picture below. Click Next. You can define the target
directory for the installation now. Confirm it with Next.
PHONORAMA
5