GE CG735 User Manual page 31

Memory Stop
The tape counter's memory stop helps you locate a certain point on the tape. When
memory stop is turned on, the tape will stop automatically during fast forward or
rewind when the tape counter reaches"O000M."
Using Memory Stop:
1. Press DISPLAY to display the tape
counter with "M."
.
Locate the place on the tape you want
to return to and press RESET to reset
tape counter to "O000M."
jMemory
O000M -
Stop On
.
Continue to record or play the tape.
When you want to return to the place
you marked, press REC/PAUSE to
stop recording, or press STOP/EJECT
to stop playback.
4. Make sure CAMERA/OFF/VCR is in
VCR. Then press REW/REVIEW. The
tape will rewind until it reaches the
tape counter reading of "O000M."
Notes: Press DISPLAY to turn memory-stop
feature on or off.
Whenever memory stop is turned on, the
camcorder will stop rewinding or fast
forwarding when the counter reaches
"'O000M.'" To continue rewinding or fast
forwarding the tape, press REW (rewind) or
F.FWD (fast forward) again.
The tape counter is automatically reset to
"0000" whenever a cassette is inserted.
29