Use The Optional Dcc096; Car Cord Adapter - RCA CC4371 User Manual

Use the RCA Optional Car Cord Adapter
The optional DCC096 car cord shown on
page 59 allows you to power your
camcorder from the cigarette lighter socket
of a car, truck, or RV. It converts 12-volts
to a 9.6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC096 for com-
plete operating instructions.
Use the DCC096 Car Cord Adapter _:_!_:_i::_: __::_!:!!_::'_:_:':_':_
/ Cigarette
,.,//Lighter
_r Socket
1. Set the CAMERA/OFF/VCR switch to 6.
OFF to turn off the camcorder.
.
.
.
.
If the battery or DC cable is attached to
the camcorder, remove it.
Insert the small plug on the car cord to
the DC IN 9.6V jack located on the back
of the camcorder.
Take the vehicle's cigarette lighter out
of the socket.
Insert the car cord's cigarette lighter
plug into the vehicle's cigarette lighter
socket.
DC IN 9.6V
Jack
To turn on the camcorder, press and hold
the small button on the CAMERA/OFF/
VCR switch while you set it to
CAMERA.
Notes: The vehicle does not have to be running
for the camcorder to operate from
the DC car cord.
The battery level indicator has no meaning when
you use the car cord to power the camcorder.
19