Table of Contents
Advertisement
Using the Playback
Features
Index
Search
The TV/VCR
automatically
records
index marks on the tape each time you begin
recording.
During playback
you can locate the program
you want to play by the
number
of index marks.
Your TV/VCR
has two index playback
features.
You can
select a specific index number
or search by scan and play.
To Select
Scan and Play Index
Playback
1. Insert the pre-recorded tape and press STOP,
2. Press SKIP/SEARCH to display the INDEX SEARCH
screen.
3. Press FF to scan forward or NEW to scan in reverse.
When the TV/VCR locates an index mark, it will stop
and play a few seconds of the program following
the mark.
4.
At any time during the search, press PLAY to stop
searching and begin playback, or press STOP to stop
the search.
If the beginning or end of the tape is reached during the
search, the message End of tape appears.
To Select
a Specific
Index
Number
for Index
Playback
1. Insert the pre-recorded tape and press STOP,
2. Press SKIP/SEARCH to display the INDEX SEARCH
screen.
INDEX
SEARCH
Press
REW
or
FF
to
begin
search
OR
Enter
a
specific
Index
n_er
/IN
INDEX
SEARCH
Scanning...
Index
number
01
Press
STOP
to
cancel
INDEX
SEARCH
Press
REW
or
FF
to
begin
search
OR
Enter
a
specific
Index
n_ber
zT{
Press
SEARCH
to
exit
3. Use the number buttons on the remote control to enter
the number of the index mark for which you want the
TV/VCR to search.
4. Press FF to search forward or REW to search in reverse.
When the TV/VCR locates the index mark, it will
begin playback.
When using index playback, the following index marks
may be skipped by the TV/VCR.
The mark closest to the current location on
the tape.
The mark at the beginning of a recorded segment
that is five minutes or less.
The mark at the beginning of the tape.
20
Advertisement
Table of Contents
