Index Search - RCA T25061GY User Manual

rS/iff/ff/IM/IYam
Using the Playback Features
Index Search
The TV/VCR automatically records index marks o_t the tape each time you begin
recording. During playback you can locate the program you want to play by the
number of index marks. Your TV/VCR has two index playback features. You can
select a specific index number or search by scan and play.
To Select Scan and Play Index Playback
1. Insert the pre-recorded
tape and press STOP.
2. PressSKIP/SEARCH to display the INDEX SEARCH
_3re_t.
3. Press FF to scanforward or REW to scan in revezse.
When theTV/VCR locates an index mark, it will s top
andplay a fewseconds o ftheprogramfollowing the
mark.
4. At any time during the search, press PLAYto stop
searching and begin playback, or press STOP to stop
the search.
If thebeginning or end ofthe tapeis reachedduring the
search, t he message Scan completed-end of tape
appear.
INDEX SEARCH
Press REW or FF
to begin scanning
or
Enter a spect/ic
index n_i_er betou
/i %
INDEX SEARCH
Searching for
tndex marks...
Press STOP to canceL
To Select a Specific Index Number for Index Playback
1. Insert the prerecorded tape and press STOP.
2. Press SKIP/SEARCH to display the INDEX SEARCH
screen.
3. Use the number buttons to enteT the number of index
marks for which you want the TV/VCR to search.
4. Press FF to search forward or REW to search in reverse.
When the TV/VCR locates the indexmark, it will begin
playback.
If the specified index mark is not found during the
search, the message Index -- was not found appears.
When using index playback, the following index marks
may be skipped by the TV/VCR.
• The mark closest to the current location on the tape.
• The mark at the beginning of a recorded segment of
five minutes or les_
• The mark at the beginning of the tape.
INDEX SEARCH
Press REW or FF
to begin scanning
or
Enter a specific
index number below
16