Index Search - RCA T19064 User Manual

Using the Playback Features
Index Search
The TV/VCR automatically records index marks on the tape each time you begin
recording. During playback you can locate the program you want to play by the
number of"index marks. Your TV/VCR has two index playback features. You can
select a specific index number or search by scan and plat .
To Select Scan and Play Index Playback
% [nser* the prerecorded tape and press STOP.
Z Press SKIP/SEARCH to displat
the INDEX SEARCH
screen,
3, Press FF to scan forward or REW to scan in reverse,
When the TViVCR locates an index mark, it will stop
and play a few" seconds of the program following
the mark,
4,
At any time during the search, press PLAY to stop
searching and begin playback, or press STOP to stop
the search.
If the beginning or end of"the tape is reached during the
search, the message
End of tape appears.
To Select a Specific Index Number for Index Playback
1, Inset* the prerecorded tape and press STOP.
2. Press SKIP/SEARCH to displat
the INDEX SEARCH
screen,
INDEX SEARCH
Press
REN
or
FF
_o begin search
OR
En_e_ _ Specific
Index n_,ber
/IN
INDEX SEARCH
Scanning===
Index number
01
Press STOP to cancel
INDEX SEARCH
Press REN or
FF
to begin search
OR
Enter a _peclflc
Index n_@_ber
_7C
Press SEARCH to exit
3. Use the number buttons on the remote control to enter
the number of the index mark for which you want the
TViVCR to search.
4, Press FF to search forward or REW to search in reverae.
When the TViVCR locates the index mark, it will
begin playback.
When using index playback, the following index marks
may be skipped/l t the TViVCR.
'INe mark closest to the current location on
the tape.
'INe mark at the beginning of a recorded segment
that is five minutes or less.
'INe mark at the beginning of the tape.
20