Parental Controls And V-Chip - RCA 32V430TYX1GYN User Manual

Using the Features
4. Choose which channel you want to set:
Set VCR1 Lets you set up the channel the TV tunes to when you press the VCR
button.
Set VCR2 Not available with your remote control.
Set SAT/CABLE Not available with your remote control.
Set DVD Lets you set up the channel the TV tunes to when you press the DVD
button.
5. Press the right arrow button to select the choice that matches the way you
have the component connected to this TV.
The choices and a brief explanation follow:
N/A Choose this if you don't have this particular component
connected to the TV, or if you don't want the TV to
automatically tune to the correct channel when you're using
this component.
CH02 (SAT/CABLE only- Not available with your remote
control).
CH03 or04 Component is connected to the TV ANT jack on
the back of the TV, and you want the TVto tune to channel 3
or 4 when you press the corresponding button on the
remote. Reminder: make sure the eomponent's Channel 3/4
switch is set to the appropriate channel.
VlD1 Component is connected to the VIDEO, S-VIDEO IN, or
Y, Pb, Pr jack on the back of the TV and you want the ]V to
tune to a video or component input channel when you press
the corresponding button.
FRNT(Front Video Input) Component is connected to the
VIDEO jack on the front of the TV and you want the TV to
tune to the front video input channel when you press the
corresponding button.
Parental Controls and V-Chip
The choices in the USA V-CHIP menu involve software inside your TV (referred to as
V-Chip) which allows you to block TV programs and movies based on violence, sex,
or other content you may believe children should not view.
Once you block programs, you can unbloek programs by entering a password.
By default, the software inside your TV is turned "off." For instructions to turn on
V-Chip, go to page 21.
Chapter 3
Graphics contained within this publication are for representation only.
15