Troubleshooting And Faq; Troubleshooting - Ematic eGlide Pro 2 Manual

The system has been updated successfully when the "Upgrade Done
Success <1> Fail <0>" notice appears in the status bar as shown
below, and device will come to the main interface after run system.
NOTE: Please don't disconnect the USB cable during the updating
process because this will cause update failure or possible system
failure of the device.

7. Troubleshooting and FAQ

7.1 Troubleshooting

7.1.1 Device can not connect to Wi-Fi
1) Ensure the wireless network is working by testing it using another
wireless device.
2) Ensure the device and the wireless router is within the range of
the wireless network to be connected too. Walls or other
obstructions will reduce the possible distances between wireless
devices.
3) Ensure the security password being used is correct.
7.1.2 Device doesn't turn on
1) You cannot turn on the device when the battery charge is below
the critical level, please charge the battery.
2) Press the RESET button on the top of the device and check if it is
46