Ematic eGlide Pro 2 Manual page 11

4.4.2 Connecting to a network: Tap "Wi-Fi Settings" to enter this
menu, the device will find the WiFi networks automatically. Please
refer to the example picture below, it has found several WiFi network
names:
After selecting the network you would like to connect to, the system
will either connect to the network. If the network is secured and
requires a security key to be entered, the system will pop up a
connection window where you can input the correct security code
and then press "Connect".
The system will connect to the network automatically, and once
connected will show a Status of "Connected" You can see the
network connection status by pressing the network name, see the
figure below:
4.2.3 IP address settings and connection: There are two setting
methods to allow the IP address to be set. Whether the IP Address is
11