Safety Notices - Ematic eGlide Pro 2 Manual

2. Safety Notices

1) Please keep the device away from strong magnetic fields in order
to avoid damage to the product.
2) Please do not let the device fall onto, rub against or knock against
hard objects during use, because this may cause surface scratches
on the device, battery damage, data loss or other damage to the
hardware.
3) Never let this product be exposed to a humid environment or rain
as the water leaking into the device could disable it to the extent of
being beyond repair.
4) Never clean the device with any chemicals or detergent, these will
damage the product surface and corrode the finish.
5) You are recommended not to use the headset with the volume at
its highest settings, please adjust the volume to an appropriate safe
level and limit the amount of time you spend using headphones to
avoid possible damage to your hearing. Excessive volume will cause
permanent hearing damage.
6) Please do not cut off the power abruptly during software updates
or downloading, because this may cause data loss or system errors.
7) Over-voltage, power cable strain and bending or squeezing of the
power cable by heavy objects must be avoided to prevent the
possibility of overheating or fire.
8) In order to eliminate the risk of electric shock, do not touch the
cable power plug with wet hands.
9) Some movies, music and pictures are under the protection of
copyright, unauthorized usage is deemed as an infringement to the
laws of copyright.
10) Please don't turn on the device on in locations where wireless
equipment is forbidden or when the usage of the device will cause
interference and possible danger.
11) All the wireless equipment is subject to external interference and
this can affect its performance.
12) Please comply with any related restrictions and rules, wireless
equipment can influence the flight of the plane; please consult the
relevant airline company if you intend to use the device on a plane.
13) Please don't use the device in a petrol station, or near to fuel or
chemicals.
14) Please comply with any related restrictions and rules; do not use
the device where blasting operations are in progress.
15) Only qualified maintenance personnel can install or repair the
4