Connecting Player To Computer - Ematic EM102VIDBL Manual

Connecting player to computer

Files can be transferred directly into the player using the USB data cable. Make sure that your computer is powered on. Below is the procedure of
connecting with computer:
1. Plug the larger USB connector of the USB cable into the USB port on the computer.
2. Plug the other end (the smaller end) of the USB cable to the player.
For Windows 98 SE/ME /2000
When the MP3 player is connected to your computer, a "Removable Disk" will be created in the "My computer". This is called the USB

standard mode, also the Media Storage Class mode (MSC mode).
For Windows XP with Media Player 10 or above/Windows Vista
It is only in this configuration that the Media Transport Protocol mode (MTP mode) is available. The

player is recognized as an "Audio Player" and following is displayed:
To switch from the MTP mode to MSC mode, press the [
a removable disc in the My Computer.
6
] button on the player. The Player now exists as