Table of Contents
Advertisement
2.0 Connecting and Charging the Player
2.1 Connecting and Disconnecting the Player from Your Computer
Turn on the player and use the included USB cable to connect it to your
computer. Plug the small end of the USB cable into the player, and the
large end of the cable into the computer.
The first time you connect the player to your computer, your computer will
detect it and automatically install any necessary drivers. When it has
finished, the player will appear in Windows under My Computer as
Removable Disk or USB Disk Device.
To safely disconnect the player from your
computer in Windows, click the green arrow
in the system tray (the area by the clock on
your task bar), which will display a list of
attached USB devices. Click the player in the
list. Windows will display a message when it
is safe to remove the player.
2.2 Charging the Battery
The player has a built-in battery that must be charged before the player
can be used.
1. Turn on the player.
2. Connect your player to a turned-on computer via the USB cable.
Charging will be begin automatically.
3. Let the player charge for 4 hours.
4. Disconnect the player from the computer using the safe removal
method on pg. 4.
E5 Series User Manual
Any USB device
that stores data
(e.g. flash drives,
cameras, and
media players) should always
be disconnected from your
computer using this method!
Page 4 of 33
Advertisement
Table of Contents
