Table of Contents
Advertisement
Touchmonitor Connections
1. Connect the DVI or VGA video cables between the monitor's DVI/VGA input connectors and
your DVI/VGA video source, respectively. Tighten the video cable's screws for best
performance.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB
port.
3. Connect the audio cable between the monitor's Audio In jack and your audio source.
4. Select the correct power cable for your region. Connect the power adaptor's input connector
to the AC power source. Connect the power adaptor's DC output connector to the monitor's
input power jack.
5. The touchmonitor ships in an OFF state. Press the power button to turn it on.
Installing the Touch Technology Software Drivers
Some software installation is required for your iTouch Plus touchmonitor to work with your
computer. No additional drivers are required for your projected-capacitive touchmonitor, it uses
Windows HID drivers.
The drivers for the Windows 7 and XP systems are available on the Elo Touch Solutions
website.
Visit www.elotouch.com for:
The most up-to-date touch driver versions
Additional touch driver information
Detailed touch driver installation guides
Touch drivers for other operating systems
User Manual: 1523L, 1723L
SW601951 Rev A, Page 8 of 29
Advertisement
Table of Contents
