Table of Contents
Advertisement
SET THE VCR1 CHANNEL
The next step lets you set the VCR1 channel. When you set the
VCR1 channel, you're telling
the TV what channel to tune to
when you press the VCR1 button
on the remote.
For example,
if'you have a VCR connected
to the Video 1 input
.jacks on the back of" the TV, you want the TV to tune to the
Video 1 input channel when you press the VCR1 button.
If, you
don't have a VCR1 component
connected
to the TV, skip this step
or select Not Connected from the VCR1 Channel choice list. (For
more, see Auto
Tuning in the Quick Reference section.)
1. Press MENU to bring up the VCR1 choice list.
2.
Point to the choice that matches the way you have your VCR
connected
to the TV.
If,you used the Connections
Foldout to hook up your TV, use
the table shown at the right to select the VCR1 channel.
3.
Press MENU to continue.
If you used
Connection A
Connection B
Connection C
Connection D
Connection E
Connection F
Connection G
Connection H
Connection I
Select
Video 1 Input
Video 1 Input
Video 1 Input
Video 1 Input
Not Connected
Not Connected
Video 2 Input
Channel 3*
Video 2 Input
* Or Channel 4, depending on
how your VCR's 3/4 switch is set.
24
Advertisement
Table of Contents
