Table of Contents
Advertisement
Jnf@r ati@n
Troubleshooting
Most problems
you encounter
with your TV you can correct by consulting
the Troubleshooting
list that [k)llows.
TV Problems
TV won't
turn on
Press the ['V button.
Make sure tlm ['V is plugged in.
Check tlm wall receptacle
(or extension cord) to make sure it is "live" by plugging
in something
else.
Something
might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on,
check the remote control sotutk)ns on p. 54.
The front panel buttons may be locked (disabled).
Use the remote control to unlock the front panel controls by selecting the
Front Panu/ Block in the Pm¢!*ltal C?antro/s menu and choosing
Viuu'.
Buttons
don't work
If youh-e using the remote, contro], press th_, ['V button first to make sure the remote, is in FV mode.
The front panel buttons may be locked (disabh'd).
Use the' r_q_aote control to unlock the front panel controls by selecting the
Front t_nd
Block in the t_l
Cbntro_ menu and choosing
Viuu_
Unplug the TV f_)r two minutes and then plug it back in. Tuna the TV on and tW again.
TV turns off while
playing
Sclwduh'd
off function may have be_.n activat_'d. Go to p. 50 f_r instructions.
Electronic protection
circuit may have been activated
because
of a power surge.
_Wait30 seconds
and then turn the TV on
again.
If this happens
flequently,
the voltage in your house may be abnormally
high or low.
TV turns on unexpectedly
Scheduled
On or _atch
fl'om the GI/II)E Plus+ system may have b_en activated.
Go to p. 50 for instructk_ns.
Blank screen
Make sure tb__ compon_qlt
conn_cted
to the TV is tm-n_d on.
T W another channel.
Press RESE[' in cas__ the picture controls are set too low.
When
I turn on the TV an icon is moving
on the screen
Make sure you have removed
the I)emo Pin fI'OlTtthe G LINK iack on the back of your TV_
No sound,
picture okay
Maybe sound is mut_'d.
Press the votum_" up button to restore sound.
Maybe speakers
an' turned off. Check the Al_ctio output
and Spuake_._ control panel in the Audio m_qm. Go to p. 47 f_r
detailed
instructk)ns.
If using
S VIDEO
cables
to connect
a component,
remember
to also
connect
the component's
left and right
Audio
Output
Jacks
to the TV's le_ and right
INPl_"
Jacks.
Can't
select
certain
channel
Channel
may be blocked
or not approved
in the Pare_ital
ControL_
m_,nu.
If using
a VCR, make
sure th<' TViVCR
button
on th<' VCR is in the
correct
mode" (press
th<' TViVCR
button
on your VCR).
Noisy stereo
reception
The station might be weak.
Press the SOUND button on your remote control to change from stereo to mono.
52
Chapter5
Advertisement
Table of Contents
