Step 2: Connecting Your Equipment; U Interface - Farallon NetopiaTM User Manual

8 Chapter 2
S
TEP
Depending on the product you purchased, the Netopia ISDN PC Card
with U interface or the Netopia ISDN PC Card with S/T interface, the
appropriate equipment is provided. Your geographical location typically
dictates the ISDN interface type to use. The following table
summarizes the interface and equipment used by geographical region:
Region
North America
Outside North
America (except
Australia)
Australia
U I
The U interface is used in North America where an external NT1 is
required to make an ISDN connection. Plug the RJ-45 cable into your
ISDN wall jack. Then connect the cable to the RJ-45 port on the
U interface connector.
2: C
ONNECTING YOUR EQUIPMENT
Interface

U interface

S/T interface
S/T interface
NTERFACE
Connecting the U interface connector and RJ-45 cable
Provided Equipment
Integrated-NT1 (ISDN U interface
connector) and RJ-45 to RJ-45
cable
ISDN S/T interface connector and
RJ-45 to RJ-45 cable
ISDN S/T interface connector,
RJ-45 to RJ-45 cable, and
terminating resistor