Table of Contents
Advertisement
62
Appendix B
Number
Code
Word Message
0
OK
1
CONNECT
2
RING
3
NO CARRIER
4
ERROR
6
NO DIAL TONE
7
BUSY
8
NO ANSWER
10
CONNECT 2400
11
CONNECT 4800
13
CONNECT 7200
14
CONNECT 12000
15
CONNECT 14400
16
CONNECT 19200
17
CONNECT 38400
18
CONNECT 57600
19
CONNECT 64000
20
CONNECT 115200
57
CARRIER 57600
59
CARRIER 64000
83
PROTOCOL: V.120
84
PROTOCOL: V.110
85
PROTOCOL: PPPC
AT
COMMAND RESULT CODES
Result codes, or status messages, are displayed after an AT command is
issued. Result codes can be displayed as a long-form word message or
as a short-form number code. The Result Code Format command (ATVn)
determines short- or long-form usage. The following table provides the AT
command result codes in both number code and word message, as well
as a description:
Description
Netopia ISDN PC Card has successfully executed your command
Connection was made; the range of the result code response is
restricted by the X command such that no speed reporting is allowed
Incoming ringing is detected on the line
Attempt to establish a connection failed; or connection ended
Syntax of command incorrect; unable to execute command; command
does not exist; or command parameter outside permitted range
ISDN not initialized
Remote user busy
Remote user not responding
Connection made at 2400 bps
Connection made at 4800 bps
Connection made at 7200 bps
Connection made at 12000 bps
Connection made at 14400 bps
Connection made at 19200 bps
Connection made at 38400 bps
Connection made at 57600 bps
Connection made at 64000 bps
Connection made at 115200 bps
ISDN line speed is 57600 bps
ISDN line speed is 64000 bps
V.120 Rate Adaption Protocol
V.110 Rate Adaption Protocol
PPP Protocol Conversion
Note: For all CONNECT result codes, the reported speed is the DTE speed.
Advertisement
Table of Contents
