Electrolux EWH 127310 W User Manual page 7

Hot Water Connection
This appliance is provided with two inlet ho-
ses: one for the cold water and one for the
hot water. The programmes of the selector
dial indicated by the symbol automatically
load hot water as well as cold water. If you
select one of these programmes, the pilot
light of button 4 illuminates to indicate that
the appliance is using the available hot wa-
ter of your domestic system.
By pressing this button the hot water con-
nection is interrupted, the pilot light of the
button goes off and the appliance loads on-
ly cold water that is heated by the electric re-
sistance provided in the appliance .
We recommend that you perform wash-
ing cycle loading only cold water in
case of proteinic or alimentary soiled
items (blood, eggs) that need a primary
soak phase with cold water. After-
wards, the water is heated gradually to
get a more efficient cleaning action and
an enzymatic reaction allowing the best
washing results.
Start Pause
This button allows you to start or to inter-
rupt the selected programme.
Delay Start
The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.
Display
5.1:
• Duration of selected programme
Indicator pilot lights
After having pressed the button 6 , the
WASHING pilot light (8.1) illuminates. When
the pilot light 8.1 illuminates this means that
the machine is operating.
The DOOR pilot light (8.2) illuminates when
the programme starts and indicates if the
door can be opened:
• light on: the door cannot be opened. The
machine is working or has stopped with
water left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light flashing: the door is opening in a few
minutes.
When the programme has finished the END
CYCLE pilot light (8.3) comes on.
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
electrolux 7
8.1
8.2
8.3