Zanussi ZWG1100 P User Manual page 22

Malfunction
Spinning starts
late or the
machine does not
spin:
No water is visible
in the drum:
If you are unable to identify or solve the problem, contact our service centre. Before
telephoning, make a note of the model, serial number and purchase date of your machine,
the Service Centre will require this information.
22
Possible cause
The electronic unbalance detection
device has cut in because the
laundry is not evenly distributed in
the drum. The laundry is redistributed
by reverse rotation of the drum. This
may happen several times before the
unbalance disappears and normal
spinning can resume. If, after 10
minutes, the laundry is still not evenly
distributed in the drum, the machine
will not spin. In this case, redistribute
the load manually and select the spin
programme.
Machines based on modern
technology operate very
economically using very little water
without affecting performance.
Model description (MOD.).......................
Product number (PNC) ...........................
Serial number (S.N.) ...............................
Solution
Redistribute the laundry.