Easy Assembly; Get Ready To Vacuum - Electrolux Z3270 series Owner's Manual

Easy Assembly

Read all instructions before using this vacuum cleaner.
Moving parts! Make sure power switch is in OFF (0) position before plugging in power cord.
Assemble the vacuum cleaner before using.
Slide handle onto Tighten two screws. Push cord into Place hose over
vacuum body. cord retainer. hose hook.
Wrap cord. Place crevice tool and Place dusting brush Snap turbo brush
wand in front of hose. behind handle. onto handle.

Get Ready to Vacuum

Adjust height for carpet Plug into outlet. Step on handle Push power switch (1) on.
or bare floor. release to lower handle into position.
If vacuum is hard to push,
Lift latch to remove dustcup. Attach turbo brush to end of wand
raise carpet setting. Empty after each use. or hose for furniture and stairs.
Electrolux Customer HELPLINE 0800 222 825. (Toll Free South Africa Wide.)
3