Setting Up The Projector; Screen Setting - Eiki XB250 Owner's Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Aspect setting] or [Setting] and then set up each set-
ting.

Screen setting

This function is to adjust the aspect mode of the projector. The values in the text box rep-
resent the current aspect status.
Item Description
Screen ..................... Switches the aspect mode. (Normal, Full,
Wide (16:9), Zoom, True, Custom) There
may not be available mode depending
on the input mode as shown in the table
below.
Ceiling ..................... Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON,
OFF)
Reset......................... Resets the Screen settings.
Input source
Screen mode Video
Normal
4
Full
4
Wide(16:9)
4
Zoom
4
True *1
Custom
4
COMPUTER
4
4
4
4
4
4
Setting up the projector
✐ The mark " " means that
4
the available screen mode
in the selected input
source system.
*1 The error message appears
when selecting the dis-
abled screen mode indi-
cated with "*1".