Indicators - Eiki EIP-HDT30 Owner's Manual

Indicators

q
w
e
r
t
y
u
Part Names and Functions
q POWER indicator
This indicator lights green when the projector
is ready to be turned on. And it flashes green in
Power Management mode. (pp.57 , 79-81)
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.79-81)
e WARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high. (pp.72, 79-81)
r WARNING FILTER indicator
– Blink slow when the filter is being scrolled.
(pp.64, 79)
– Blink fast when the filter scroll is not working
properly. (pp.64, 81)
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement. (pp.62, 64, 81)
t SHUTTER indicator
Light blue when the shutter is closed. (p79)
y LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end. (pp.68, 80)
u LAMP  REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end. (pp.68, 80)
13