Table of Contents
Advertisement
Item Name
Band
Channel Number
MAC Address 1 to 4
Wireless Module
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have
clicked "Apply", you will see the following message:
Description
Select from one of the following options:
2.4GHz (B): Allows 802.11b wireless network clients
to connect to this router.
2.4GHz (N): Allows 802.11n wireless network clients
to connect to this router.
2.4GHz (B+G): Allows 802.11b and 802.11g wireless
network clients to connect to this router.
2.4GHz (G): Allows 802.11g wireless network clients
to connect to this router.
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to this router
(recommended).
Select a channel from the dropdown menu. All access
points must use the same channel (1 to 13).
Input the MAC addresses of the wireless access points
with which you wish to connect.
Select "Enable" to turn on the 2.4GHz wireless
signal and select "Disable" to turn it off.
43
Advertisement
Table of Contents
