Standard Cmos Setup - ECS 945GCT-M2 Manual

For the purpose of better product maintenance, the manufacture reserves the right
to change the BIOS items presented in this manual. The BIOS setup screens shown
in this chapter are for reference only and may differ from the actual BIOS. Please
visit the manufacture's website for updated manual.

Standard CMOS Setup

This option displays basic information about your system.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
System Date
System Time
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
PCI IDE BusMaster
Floppy A
: Move
F1: General Help
System Date & System Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make changes
to the Windows Date and Time Properties utility.
IDE Devices
Your computer has one IDE channel which can be installed with one or two devices (Master
and Slave). In addition, this motherboard supports four SATA channels and each channel
allows one SATA device to be installed. Use these items to configure each device on the IDE
channel.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device : Not Detected
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
: Move
F1: General Help
Standard CMOS Setup
Sun 01/01/2007
00 : 12 : 59
Use [Enter], [TAB] or
Not Detected
[SHIFT-TAB] to select
Not Detected
a field.
Not Detected
Not Detected
Use [+] or [-] to
Not Detected
configure system Date.
Not Detected
Enabled
Not Deteced
Enter : Select +/-/: Value
F10: Save and Exit
F9: Optimized Defaults ESC: Exit
Primary IDE Master
Select the type
of device connected
Auto
to the system.
Auto
Auto
Auto
Auto
Auto
Enabled
Enter : Select
+/-/: Value F10: Save and Exit
F9: Optimized Defaults ESC: Exit
Using BIOS
Help Item
Help Item
29