Vacation, Storage, And Moving Care - Whirlpool duet WFW9451XW00 Use & Care Manual

Front-loading automatic-washer
Table of Contents

Advertisement

Available languages

Available languages

washer. If storing or moving your washer during freezing weather,
winterize it.
Non-use
or vacation
care:
Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:
Unplug washer or disconnect power.
Turn off the water supply to the washer. This helps avoid
unintended flooding (due to a water pressure surge) while you
are away.
Slightly open door to provide ventilation.
To winterize
washer:
1. Put 1 qt (1 L) of R.V.-type antifreeze in the drum.
2. Run washer on a Drain/Spin cycle.
3. Unplug washer or disconnect power.
4. Shut off both water faucets.
5. Disconnect water inlet hoses from faucets and drain.
To use washer
again:
1. Flush water pipes. Reconnect water inlet hoses to faucets.
Turn on both water faucets.
To transport
the washer:
1. If washer will be moved during freezing weather, put in
1 qt (1 L) of R.V.-type antifreeze in the drum. Run washer on a
Drain/Spin cycle.
2. Unplug the power cord.
3. Disconnect the drain hose from the drain system and attach to
rear panel clips.
4. Shut off both water faucets.
5. Disconnect the water inlet hoses from faucets, then drain the
hoses, and clip them to the rear panel of the washer.
IMPORTANT: Call for service. Do not reuse transport bolts.
Washer must be transported
in the upright position. To avoid
suspension and structural damage to your washer, it must be
properly set up for relocation by a certified technician.
Reinstalling
the washer
1. Follow the "Installation Instructions" to locate, level, and
connect the washer.
2=
Run the washer through the Normal/Casual cycle with 1/2 the
manufacturer's recommended
amount of HE detergent for a
medium-size
load, to clean the washer and remove the
antifreeze, if used.
2=
3.
Electrical
Shock Hazard
Plug into a grounded 3 prong outlet,
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow
these instructions can result in death,
fire, or electrical
shock.
Plug in washer or reconnect power.
Run the washer through the Normal/Casual cycle with 1/2 the
manufacturer's
recommended
amount of HE detergent for a
medium-size
load, to clean the washer and remove the
antifreeze, if used.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents