Whirlpool WTW4950XW3 Use And Care Manual page 5

RINSE
Sensing Wash Rinse Spin Done
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. Fabric softener will
be added if the Fabric Softener Added-Yes option was
selected. Some cycles will use a spray rinse.
SPiN
Sensing Wash Rinse Spin Done
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
LID LOCKED
To allow for proper load sensing and
spinning, the lid will lock and the Lid
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
I
Lid
Locked
If you need to open the lid, press
START/Pause/Unlock. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press
START/Pause/Unlock again to resume
the cycle. Avoid opening the lid during
START
Pause/Unlock
sensing. The sensing process will start over when the
washer is restarted.
DONE
Sensing Wash Rinse Spin Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.