Overview
This QuickStart guide is intended as an overview to help experienced installers unpack, install, and configure a
Brocade 5000 switch quickly. For detailed installation and configuration instructions, refer to the Brocade 5000
Hardware Reference Manual.
You can install the Brocade 5000 in the following ways:
As a standalone unit on a flat surface, as described in this document.
•
In an EIA cabinet using the Mounting Ears provided with the switch. For detailed instructions, refer to the
•
Brocade 5000 Rack Mounting Ears Installation Procedure.
In an EIA cabinet using the Fixed Rack Mount Kit (optional). For detailed instructions, refer to the Brocade Fixed
•
Rack Mount Kit Installation Procedure.
In an EIA cabinet using the Slide Rack Mount Kit (optional). For detailed instructions, refer to the Brocade Slide
•
Rack Mount Kit Installation Procedure.
Refer to the following sections of this guide for specific information:
"Time and Items Required"
•
"Site Planning and Safety Guidelines"
•
"Items Included with the Brocade 5000"
•
"Installing the Brocade 5000 in an EIA Cabinet"
•
"Configuring the Brocade 5000"
•
Time and Items Required
Table 1
lists the main installation tasks for the Brocade 5000 switch and the estimated time required . These time
estimates assume a prepared installation site and appropriate power and network connectivity.
Brocade 5000 QuickStart Guide
Publication Number: 53-1000425-01
on page 5
on page 6
on page 7
on page 8
on page 8
5 of 12