How To Stop Your Pressure Washer; How To Use Accessory Tray - Troy-Bilt 020344-2 Operator's Manual

_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• DONOTallowCHILDREN t o operatepressure washer.
• Keephigh pressure hoseconnected to pumpand spraygun
whilesystemis pressurized.
• NEVER aimspraygun at people, a nimals,or plants.
• DONOT securespraygun in openposition.
• DONOT leavespraygun unattended whilemachine is running.
• NEVER usea spraygun whichdoesnothavea triggerlockor
trigger guardin placeand in workingorder.
• Alwaysbe certainspraygun,nozzles andaccessories a re
correctlyattached.
_i, WARNING Contact with muffler area can result in
serious burns.
Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
• DONOT touchhot partsandAVOIDhotexhaustgases.
• Allow equipment t o coolbeforetouching.
• Keep at least5 feet (152cm) of clearance on all sidesof
pressure washerincludingoverhead.
• It is a violationof CaliforniaPublicResource Code,Section
4442,to useor operatethe engine on anyforest-covered,
brush-covered, or grass-covered land unless the exhaust
systemis equipped with a sparkarrester,as definedin Section
4442,maintained in effectiveworkingorder.Otherstatesor
federaljurisdictionsmayhavesimilar laws.
Contact t he originalequipment m anufacturer, retailer,or dealer
to obtaina sparkarresterdesigned for the exhaustsystem
installedon this engine.
• Replacement partsmust bethe sameand installedin the same
positionasthe originalparts.
How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Turn engine off according to instructions given in
engine operator's manual.
3. ALWAYS point gun in a safe direction and press red
button and squeezespray gun trigger to release
retained high water pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephigh pressure hoseconnected to pumpand spraygun
whilesystemis pressurized.
• ALWAYS pointspraygun in safedirection,pressredbutton
andsqueeze sprayguntriggerto release highpressure, e very
time youstop engine.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension and quick connect
spray tips. There is also a hook at the front of the accessory
tray to hold your high pressure hose.
NOTE:The extra hole in the tray is for storing a utility brush.
The extra clip in the tray is for storing a turbo nozzle.The
brush and turbo nozzle are NOT included with your pressure
washer. You can buy these items as optional accessories.
1. Place nozzle extension through hole on accessory tray,
as shown.
!
2. Place spray gun through hole on accessory tray on
right side of unit.
NOTE:You may also use the spray gun holder wireform
attached to the handle to store your spray gun and nozzle
extension, as shown in Featuresand Controls section.
3. Insert multi-colored spray tips in spaces provided in
accessory tray.
4. Hang high pressure hose on hook attached to
accessory tray on front of tray, as shown.
13