Table of Contents
Advertisement
On-Screen
Display Menu
•
•
-
You can adjust the sound
quality
to your preference
with the following
settings.
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio
from the right
speaker
_y
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
o Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
o For resetting all AudEo adjustment items to the factory
preset values, press _k/T to select "Reset", press ENTER,
press A/T
to select "Yes", and then press ENTER.
The surround
function
produces
Surround
effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound,
Off: Outputs the normal sound.
o Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
o For some discs, setup may be required on your DVD player.
In this case, please refer to the operation manual of your
DVD player.
_9_4
::S_
_'_J_
....
This function
allows you to enjoy bass-enhanced
sound.
On: Bass Enhancer function is on.
Off: Normal sound.
o Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
Power control
setting
allows you to save energy.
This function
allows you to automatically
reduce
the
backlight
brightness
in order
to decrease
the power
consumption
and increase
the baeklight
lifespan.
Standard:
Reduces the backfght brightness to 80%.
When set to "Standard", "_"
appears on the screen.
Advanced:
Reduces the backtght brightness to 70%.
When set to "Advanced", "_'_"
appears on the
screen.
Off: The backfght brightness is the same value of your
settings in the selected AV MODE.
o "Power Saving" does not function when you set AV MODE
to "DYNAMIC (Fixed)".
o When "OPC" is set to "On(Display)" or "On" while "Power
Saving" is set to "Standard" or "Advanced", the Power
Saving leaf icon appears to the left of "OPC" in the Picture
menu screen.
o When "OPC" is set to "Off" while "Power Saving" is set
to "Standard" or "Advanced", the Power Saving leaf icon
appears to the left of "Backlght"
in the Picture menu
screen.
When set to "Enable",
the power will automatically
shut
down if there is no signal for 15 minutes.
o When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
o "Disable" is the factory preset value.
o When a TV program finishes, this function may not operate.
You can set the time length the TV takes to automatically
shut the power
down when there is no operation.
30min/3Heur/Disable
. When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
o "Disable" is the factory preset value.
You
can
run
EZ
Setup
again,
even
after
setting
up
the
preset
channels.
Language:
Select
from
among
3 languages
(English,
French
and
Spanish).
TV Location:
Select
"Home"
or "Store"
tor the
location
where
you plan
to install
the TV. This
product
qualifies
tor ENERGY
STAR
in Home
mode
detault
setting.
Home:
"Power
Saving"
is set to "Oft", and AV MODE is set to
"STANDARD".
Store:
"Power
Saving" is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature
Demo can
be set.
Picture
Reset:
AV MODE will be set to "DYNAMIC
(Rxed)"
regardless
of whether
Picture Reset is "On" or "Oft". If
you select
"On", AV MODE will be reset to "DYNAMIC
(Fixed)" if there is no operation
for 30 minutes. When
"Oft"
is selected, AV MODE will be set to "DYNAMIC
(Fixed)".
Feature
Denlo: When "On" is selected, after all the settings
are completed,
the Feature
Demo screen is displayed
if
there is no operation
for several minutes.
ENERGY
STAR
quatlcation
is based
on AV MODE
"STANDARD".
Air/Cable:
Make
sure what
kind
ot connection
is made
with
your
TV when
selecting
"Air"
or "Cable".
CH
Search:
Channel
auto
search
makes
the TV look for
all channels
viewable
in the
set area.
See Initial Instalation on page 12 for setting each item,
If no channel is found, confirm the type of connection made
with your TV and try "EZ Setup" again.
19
Hide quick links:
Advertisement
Table of Contents
