Table of Contents
Advertisement
On=Screen Display Menu
Adjusts the picture to your preference with the
following picture settings.
Example
CO
AVMODE VIEWMODE FLASHBACK
E::::3 _
C:Z3C:::3
AQUOS
I
NET
APPS
A
B
C
D
0000
1 Press MENU to display the MENU screen, and then
press 4/_
to select "Picture Settings".
2 Press A/V
to select a specific adjustment item.
o Select "Advanced" and then press ENTER to set
"C.MS.-Hue", "C.MS.-Saturation", "C.M.S.-Value",
"Color Temp.", "Motion Enhancement", "Active
Contrast", "Gamma Adjustment", "Black Level", "Film
Mode", "Digital Noise Reduction", "Monochrome" or
"Rangeof OPC".
3 Press A/T(or
_1/_-) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less
For more
brightness
brightness
Color
For less color
For more color
intensity
intensity
Tint
Skin tones
Skin tones
become reddish
become greenish
Sharpness
For less
For more
sharpness
sharpness
For resetting all Picture adjustment items to the factory
preset values, press h,/T
to select "Reset", press ENTER,
press h,/T
to select "Yes", and then press ENTER.
The audio and video settings can be changed to suit
the program or input content being watched.
Select from the following AV modes.
II When the input source is TV, COMPONENT,
VIDEO 1 or 2:
AUTO/STAN DARD/MOVI E /GAME/USER/DYNAMIC/
DYNAMIC(Fixed)
m When
the input source
is PC IN or HDMI
1 to 4:
AUTO/STAN DARD/MOVIE/GAM E/PC/USER/DYNAMIC/
DYNAMIC(Fixed)
The selectable items vary depending on the input source.
You can select AV MODE by pressing AV MODE on the
remote control unit. See page 22 for details of AV MODE
settings.
Automatically
adjusts
the brightness
of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On:Display:
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
= When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
= When set to "On:Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
---q
F_
This TV provides various advanced functions for
optimizing the picture quality.
©olor tone is managed
using the six-color
adjustment
setting.
C.M.S.-Hue:
This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation:
Increases or decreases the
saturation of a selected color.
C.M.S.-Value:
A higher value makes the image brighter.
A lower value makes the image darker.
= For resetting all adjustment items to the factory preset
values, press h,/T
to select "Reset", and then press
ENTER.
Q-
27
Hide quick links:
Advertisement
Chapters
Table of Contents
