Sharp AQUOS LC-40LE810UN Operation Manual page 27

On=Screen Display Menu
You can adjust the sound quality to your preference
with the following settings.
Example
AQUOS NET DOCK
FAVORITE SURROUND AUDIO FREEZE
A B C D
0000
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Audio Settings".
2 Press A/V to select a specific adjustment item.
o Select "Auto Volume", "Surround", "Bass Enhancer" or
"Clear Voice", and then press ENTER to set each item.
3 Press ,&/T (or _/_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio Decrease audio
from the right from the left
speaker speaker
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High: Reducing the loudness gaps among different
sound sources strongly.
Middle:
Low: Reducing the loudness gaps among different
sound sources slightly.
The surround function produces Surround effect from
the speakers.
On" Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
= You can choose Surround by pressing SURROUND on
the remote control unit. (See page 18.)
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 29.)
= For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
This function allows you to enjoy bass-enhanced sound.
On" Bass Enhancer function is on.
Off: Normal sound.
= Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 29.)
This function emphasizes speech against background
noise for greater clarity.
= Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 29.)
= For resetting Audio adjustment items, except "Clear Voice",
to the factory preset values, press A/T to select "Reset",
press ENTER, press h,/T to select "Yes", and then press
ENTER.
Q- 26