Table of Contents
Advertisement
[] TV Screen Display
Mode
2 typesof displaymodescan beselectedin the digital modewhen the
broadcastingstation issending 16:9video signal.
Press [VIEW MODE] repeatedly to switch the TV aspect
ratio.
VIEWMODE
LETTERBOX
ZOOM
[LETTERBOX]
Display the digital-supported
program
in full-screen.
Black borders will spread in the upper and lower
screen,
[ZOOM]
Enlarge and display the center area of the digital-
supported
program.
The right and left side of image will be cut off,
No te:
•Youmay not switch the display mode depending on the
program.
•In "INPUT2" of the external input mode, you can also select
the display mode either "4:3 (normal)" or "WIDE" when the
connected external device outputs 480p video signal and
the following is displayed on the TV screen.
[
INPUT2 i
4SOP
Select "WIDE" accordingly if your DVD video is recorded as
anamorphic widescreen.
4:3
WIDE
[] Sleep Timer
Thesleeptimer canbeset toautomatically turn offthe unitafter an
incremental p eriodoftime.
1
SLEEP
Press [SLEEP] to set the sleep timer.
SLEEP OFF
• Sleep timer
display appears on theTV
screen.
2
Press [SLEEP] repeatedly
to change the amount
of
time until shut off,
SLEEP
SLEEP 120MIN
•You can set your unit to turn off after a set period of
time (from 30 to 150 minutes).
• Each press of [SLEEP] will increase the time by 30
minutes.
• After set up, the sleep timer display can be called up
for checking
by pressing
[SLEEP].
To Cancel the Sleep Timer
Press [SLEEP] repeatedly
until "SLEEP OFF" is displayed
on the TV screen.
Note:
I
•The sleep timer setting display
will automatically
disappear
in I 0 seconds,
l
• When you disconnect
the unit from the AC outlet or when a
power failure occurs, the sleep timer setting
will be canceled.
EN
Advertisement
Table of Contents
