Connecting To A Wlan - Samsung SMARTCAMERA WB150 User Manual

Connecting to a and configunngnetwork seSings
Learn to connect via an access point (AP) when you are in a range of a WLAN, You can also configure network settings.
Connecting to a WLAN
Rotate the mode dial to Wi-Fi,
2 Select @, @, _>, 2, or _,
{_ Press [MENU],and then select AP Setting,
• Insome modes,press[MENU] o r to/owthe on screen
instructions untilthe APSettingscreenappears.
• Thecameraautomatically s earchestot available A P devices.
_:SSelect an AR
Samsung 2 (_1_) "@ !_
Samsung 3 _ _ _"
Sat,suing 4 _ a _' i_!
• Select WPS PBC to connect to a WPS AR
• Select Refresh to refresh connectable APs,
• Select Add wireless network to add an AP manually,
¢i_) iAd hoc AP
I_ Secured AP
WPS AP
i Signal strength
Press [Q] to open AP setting options
• When you select a secured AR a pop-up window appears,
Enter the required passwords to connect to the WLAN, For
information about entering text, refer to "Entering text".
(p. 103)
• When a Iogin page appears, reter to "Using the Iogin browser".
(p, 101)
• When you select an unsecured AR the camera wi/connect
to the WLAN.
• If you select a WPS profile supported AR select WPS PIN,
and then enter a PIN on the AP device, You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then pushing the WPS button on the AP device.
Wirelessnetwork (VVB150F/WB152F o nly) 100