Table of Contents
Advertisement
Available languages
Available languages
Connecting to a WLAN
1
Rotate the mode dial to
.
2
Select
,
, or
.
3
Follow the on-screen instructions until the Wi-Fi Setting
screen appears.
• The camera automatically searches for available AP
devices.
• In some modes, press [m], and then select Wi-Fi
Setting.
4
Select an AP.
• When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN.
• If you select a WPS profile supported AP, select →
WPS PIN connection, and then enter a PIN on the AP
device. You can also connect to a WPS profile supported
AP by selecting → WPS button connection on the
camera, and then pushing the WPS button on the AP
device.
EN-14
Using the DIRECT LINK button
Press [DIRECT LINK] to activate the Wi-Fi function that you have
designated.
Setting a DIRECT LINK button option
1
Rotate the mode dial to
.
2
Select General → DIRECT LINK (Wi-Fi Button).
3
Select an option.
Using the NFC feature (Tag & Go)
1
Place the smart phone's NFC antenna near the camera's
NFC tag for more than 2 seconds.
• Do not modify the tag information in any way.
2
Transfer files or launch a Wi-Fi function depending on
the current mode.
• Wi-Fi mode: MobileLink, Remote Viewfinder
• Playback mode: Transfer a file immediately.
(Photo Beam), MobileLink
• Shooting mode: AutoShare, Remote Viewfinder
- To set a Wi-Fi function to launch in Shooting mode,
rotate the mode dial to
, and then select General →
Live view NFC → a Wi-Fi function.
Network connection tips
• Some Wi-Fi features are not available if you do not insert a
memory card.
• The quality of the network connection will be determined by the AP.
• The further the distance between your camera and the AP, the
longer it will take to connect to the network.
• If a nearby device is using the same radio frequency signal as
your camera, it may interrupt your connection.
• If your AP name is not in English, the camera may not be able to
locate the device or the name may appear incorrectly.
• For network settings or a password, contact your network
administrator or network service provider.
• If a WLAN requires authentication from the service provider,
you may not be able to connect to it. To connect to the WLAN,
contact your network service provider.
• Depending on the encryption type, the number of digits in the
password may differ.
• A WLAN connection may not be possible in all surroundings.
• The camera may display a WLAN enabled printer on the AP List.
You cannot connect to a network via a printer.
• You cannot connect your camera to a network and a TV
simultaneously.
• Connecting to a network may incur additional charges. Costs will
vary based on the conditions of your contract.
• If you cannot connect to a WLAN, try another AP from the
available AP list.
• A login page may appear when you select free WLANs
provided by some network service providers. Enter your
ID and password to connect to the WLAN. For information
about registering or the service, contact the network service
providers.
• Be cautious when you enter personal information for an
AP connection. Do not enter any payment or credit card
information on your camera. The manufacturer is not liable for
any problem caused by entering such information.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio
transmission laws in your region. To ensure compliance, use
the WLAN feature only in the country where you purchased
the camera.
• The process for adjusting network settings may differ,
depending on network conditions.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully
charged.
• You cannot upload or send files captured in some modes.
• Files that you transfer to another device may not be supported
by the device. In this case, use a computer to playback the files.
EN-15
Advertisement
Table of Contents
