Sound Menu; Picture In Picture (Pip) - Samsung Series 7 7000 UN46C7000 User Manual

Basic Features
Picture in Picture (PIP)
PIP
You can watch the TV tuner and one external video source
simultaneously, PIP (Picture-in-Picture) does not function in
the same mode.
(_ MENUITTI _ Setup --_ PiP --_ ENTERI_
NOTE
For PIP sound, refer to the Sound Select
instructions.
* If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
* You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
* While V-Chip or Internet@TV is in operation, the PIP
function cannot be used.
* PIP Settings
Min_i re
component, HDMii/Dvi, I
HDMm2,HDMI3, HDMI4, I IV
PC I
m
m
m
m
m
m
PIP (Off / On): Activate or deactivate the PIP function.
Air/Cable (Air / Cable): Select either Air or Cable as the
input source for the sub-screen.
Channel: Select the channel for the sub-screen.
Size ([_ / [_ / _ / iiq): Select a size for the sub-
picture,
Position ([_ / [Z_ / P_ / [Z): Select a position for the
sub-picture,
In Double (_, iiq) mode, Position cannot be
selected.
Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
(_ MENU ITTI--_Support-_ ENTER E_
Legal Notice ..................................................................................
The Legal Notice may differ depending on the country.
Self Diagnos!s ...............................................................................
Self Diagnostic might take few seconds, this is part of
the normal operation of the TM
ml Picture Test: Use to check for picture problems.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes, There may be a
problem with the T_, Contact Samsung's Call Center for
assistance (1-800-SAMSUNG),
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment,
Please check your connections, If the problem persists,
refer to the external device's user manual.
ml Sound Test: Use the built-in melody sound to check for
sound problems.
If you hear no sound from the TV's speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes, There may be a
problem with the T_, Contact Samsung's Call Center for
assistance (1-800-SAMSUNG),
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment,
Please check your connections, If the problem persists,
refer to the external device's user manual.
ml Signal Information: (digital channels only)An HD
channel's reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
ml Troubleshooting: If the TV seems to have a problem,
refer to this description.
If none of these troubleshooting tips apply, contact
the Samsung customer service center.
8 English