Adjusting The Height Of The Upper Rack; Removing The Upper Rack - Samsung DMT4000 series User Manual

ADJUSTING THE HEIGHT OF THE UPPER RACK
You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can
accommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to
12 in. (30cm)in diameter.
DMT400 Series
To adjust the height of the upper rack, follow these steps:
1. Remove the upper rack following the directions in Removing the
Upper Rack below.
2. If you want to lower the upper rack, re-install the rack as shown in
Figure A to the right.
3. If you want to raise the upper rack, re-install the rack as shown in
Figure B to the right.
,/_We recommend adjusting the height of the upper rack before loading
....... dishes into the rack. If you adjust the the rack after loading the
dishes, you may damage the dishes.
LAj
REMOVING THE UPPER RACK
Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front. See the illustrations below.
AWhile the upper rack is removable, it must be installed for the dishwasher to operate properly.
....... If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
perform poorly.
Step 1. Step 2. Step 3.
usng your dishwasher 15